This is a major inconvenience, especially when you have a pile of dirty laundry. Here’s what could be going on:

• Power Problems: Check the outlet, circuit breaker, and power cord to ensure the machine is getting electricity.
• Lid Switch Malfunction: Most washers won’t start if the lid isn’t closed properly. If the switch is broken, it won’t signal that the lid is closed.
• Timer or Control Board Issue: If the timer or control board isn’t working, the washer won’t know to start the cycle.

This can leave your clothes dirty and soapy. Possible causes include:

• Water Supply Issues: Check the water inlet hoses to make sure they’re turned on and not kinked or clogged.
• Faulty Inlet Valve: The inlet valve controls the flow of water into the washer. If it’s not working, water won’t enter the machine.
• Water Level Switch Problem: This switch tells the washer when to stop filling. If it’s not working, the washer may not fill or overfill.

This can leave your clothes soaking wet and create a mess. Here are some possible reasons:

• Clogged Drain Hose or Pump: Food, lint, or other debris can clog the drain hose or pump, preventing water from draining.
• Faulty Drain Pump: The pump pushes water out of the washer. If it’s broken, water won’t drain.
• Lid Switch Malfunction: Some washers won’t drain if the lid isn’t closed properly.

While some noise is normal, loud banging, grinding, or squealing can indicate a problem. Possible causes include:

• Worn Out Bearings: The bearings support the drum and can wear out over time, causing noise.
• Loose Objects: Coins, buttons, or other small items can get stuck in the drum or pump, causing noise.
• Unbalanced Load: An unbalanced load can cause the washer to vibrate and make noise.